Our honeycomb PCA perlator tap aerator is the model of choice for those who are looking for a water saving product that can provide a little more water and still save on consumption, energy and overall bills. The honeycomb structure of the tap aerator is designed to stop lime scale and replaces the traditional wired mesh structure that leaches nickel, which is not good for your health.
Only using 3.8 liters/min (1.0 gallon/min) of water, this water saving nozzle can achieve a 57% water reduction (compared to a standard 9 liters/min or 2.4 gallons/min aerator). As the flow rate of this water saving nozzle is slightly higher, you are then exposed to the feeling of a lot more water whilst still achieving a substantial amount of water that in turn translate to less water, energy and monetary savings.
Installation is very easy and can be installed in 95% of all washbasin taps. You can buy this model as an insert only or with male (M24) housing or female (M22) housing. All you need to do is unscrew your current nozzle on your washbasin tap, remove the existing high flow tap nozzle and replace with this water saving nozzle.
1. Remove old aerator from faucet. Use wrench if necessary.
2. Remove any old washers that might be caught inside the spout.
3. Clean the threads inside the faucet spout.
4. Install the new aerator onto the spout by hand.
5. Turn on faucet. If leak occurs, tighten more firmly.
Turn your any Bathroom fixture into a eco friendly faucet when washing your hands with our sacrificing the user experience.
3.8 liters/min = 1.0 gallon/minute
Standards & Product Registration
Meets Dubai Municipality Green Building Regulations
Abu Dhabi Quality & Conformity Council (QCC) Accredit